| Inspection Services
| Licensing Services
| Permits and Certificates
| Other Services
| Publications and Apps
The Boiler Inspection Division was established by legislative action in 1917 to protect the public from the inherent dangers prevailing in the construction, installation, operation and repair of steam boilers and related pressure vessels.
The Division's primary objective is the prevention of boiler and pressure vessel accidents which might cause loss of life and/or extensive property damage. This is accomplished by the enforcement of the appropriate sections of the various codes formulated by the American Society of Mechanical Engineers (ASME) and enforcement of the rules and regulations of the National Board of Boiler and Pressure Vessel Inspectors Code adopted by the Boiler Division.
The Boiler Inspection Division will at all times work closely with sellers, installers, repairmen, owners, users and operators, by providing assistance in interpreting the boiler safety laws of the State of Arkansas, the A.S.M.E., and the National Board of Boiler and Pressure Vessel Inspection Codes.
The Boiler Inspection Division is self-supporting and operates only on fees established and approved by the General Assembly. The fees are for services such as annual and biennial inspections of all boilers and pressure vessels; the examination and licensing of boiler operators; quality control assurance surveys; ASME Code Shop service; and licensing of firms to install and repair boilers and vessels.
For more information on the Boiler Inspection Division, call Linda Black at 501-682-4513.
Hot Water Heater Inspection & Maintenance - A Portrait of a Disaster
Anhydrous Ammonia - Contact Phone: 501-682-4553. Anhydrous Ammonia vessels are inspected by State Inspectors annually. Some storage vessels requirements are:
- Have legible and valid Nameplate
- Bear the National Board Registration
- Be constructed for Ammonia Storage
- Have current and valid Boiler Division Inspection sticker
- Be constructed to ASME Section VIII Div. -1
Insurance Inspections - Contact Phone: 501-682-4515. Insurance Inspectors set up their own schedules and appointments. All inspection fees are paid by the insurance company; however, this does not include the certificate fees. The following Insurance Companies are qualified to inspect boilers and pressure vessels in the State of Arkansas:
- Ace American Insurance Co
- Arise Inc
- Chubb Group (Chubb & Son Div of Federal Insurance Co)
- Cincinnati Insurance
- CNA Insurance
- Factory Mutual (FM Global)
- Hartford Steam Boiler
- Liberty Mutual Ins Co
- National Union Ins Co of Pittsburgh PA
- OneBeacon America Ins Co
- OneCis Ins Co (A Bureau Veritas Co)
- Seneca Insurance Company
- Starr Indemnity and Liability Co
- The Travelers (St. Paul Travelers)
- XL Insurance America Inc
- Zurich/American Insurance Co (Zurich Services Corporation)
State Inspections - Contact Phone: 501-682-4553. The State of Arkansas Boiler Division inspects those boilers and pressure vessels located in companies which do not have boiler/pressure vessel insurance through one of the authorized insurance inspection companies. Inspections made by the state are charged an inspection fee as well as a certificate fee.
Boiler Operator Licenses - Beginning February 1, 2011, there will be a $25.00 testing fee which must be prepaid before an applicant may take the examination. If the applicant passes the test, this fee will be applied to the first year’s license. If the applicant must re-test, there will be a $25.00 fee per test. Upon passing the test, the fee for that test will be applied to the first year’s license. No refunds are given for testing fees.
Contact Phone: 501-682-4513. There are two types of boiler operator licenses:
- Low Pressure Boiler Operator Licenses allow operation of low pressure boilers only.
- High Pressure Boiler Operator Licenses allow operation of both low and high pressure boilers.
6 months training/experience under a licensed boiler operator is required prior to taking either examination. A DD214 form may be acceptable. Applications may be acquired through the Boiler Division. Completed applications must be brought to testing site at time of testing, and given to the state inspector who administers the test.
The test is given in the Little Rock office on the first Monday of each month, unless the office is closed. Tests may be given at various dates at key locations around the state; please call for more information. Appointments are required to take the test at any location. Seating is limited, so please call in advance to ensure availability.
Repair Licenses - Contact Phone: 501-682-4514. If a company repairs boilers or pressure vessels in the State of Arkansas, that company is required to possess a current Repair License with the Boiler Division.
Sell & Installation Licenses -
- All Repair Licenses expire on December 31st of each year.
- The license fee is $75.00 per calendar year.
- Those companies who do weld repairs on their own vessels must either hold a current NB Code “R” stamp certification or submit to us copies of their Quality Control Manual, Weld Procedures Specifications, Welders Qualification Records and supporting Procedure Qualification Records for Boiler Division files.
- Companies or Individuals who do weld repairs on boilers and/or pressure vessels not at their own location must hold an “R” stamp issued by the National Board of Boilers and Pressure Vessels.
- All Welders must be examined and qualified to Section IX of the ASME Code. All welded repairs/alterations require an R-1 or State Welding form.
Contact Phone: 501-682-4514. If a company sells or installs boilers, pressure vessels, or pressure piping in the State of Arkansas, that company is required to possess a current Installation License with the Boiler Division.
- All Installation Licenses expire on December 31st of each year.
- If a company installs pressure piping, they must have the Pressure Piping Endorsement on their Installation License.
- The license fee is $75.00 per calendar year.
- Applicants for a license who perform welding shall possess the National Board “R” stamp or shall certify that they perform welding only on vessels owned and operated by the applicant.
- All Welders must be examined and qualified to Section IX of the ASME Code.